AO Smith Water Purifire (S3+)

Net Weight 8.5 kgs (approx.) Gross Weight 10 kgs (approx.) Flow rate *Up to 15 litres per hour Storage tank capacity 5 litres (approx.) Purification technology RO (Reverse Osmosis) 6 Stage Purifying Technology Pre Filter, Sediment filter + SCB Filter( Fine Sediment + Carbon block) + Side Stream RO Membrane + SCM-TECH(Silver Activated Post Carbon+ MIN-TECH) Membrane type Thin film composite RO membrane Material of construction for plastic parts Food safe, non-toxic, engineering grade plastics Pump type Diaphragm pump, 24VDC, 0.26 Amps, Operating Pressure 125 psi (Max.) Input Voltage range 150 – 300 VAC, 50 Hz Power rating (Max) 48 Watts System input pressure*** 5 psi to 30 psi % Recovery** Up to 30% Note: * Flow rate depends on variable factors such as feed water pressure, feed water characteristics and condition of the RO membrane and filters. ** Recovery and TDS reduction percentages also depend on variable factors such as life and condition of the RO membrane and filters, feed water pressure and feed water characteristics. *** If input pressure exceeds 30 psi, a pressure reducing valve needs to be installed at the feed line. If the pressure is lower than 7 psi, a booster pump needs to be installed. Ensure you buy them from A. O. Smith Company Authorised Service Technician.